New Vitara Brezza Side Body Graphics Stickers | Complete Set | Original OEM Type

New Vitara Brezza Side Body Graphics Stickers | Complete Set | Original OEM Type

• Self-adhesive, matte-finished, high-quality vinyl-based cut out the decal
• Long-lasting, water proof, can be cleaned with a damp cloth
• Completely safe for your car paint, no damage or mark on removing

Application Instructions:

1.) Take out the decals carefully from the container

2.) Place the decals on the table before applying and check the left and right side properly. Ensure the sticker is in an appropriate position without any bubbles and overlapping also counts the number of pieces.

3.) Clean the surface of your car with distilled water (please do not use ground or any hard water) to make it free of all dust & grease and wipe with a clean dry cloth.

4.) Remove the paper from the bottom of the decals. Make sure you remove this gently.

5.) Moist the decals with water from the back side & paste it on the desired location.

6.) When you are satisfied with the placement, apply the decals on the surface with the help of squeeze and water.

7.) Set the decals on the surface and once you are satisfied with the placement, apply the decals on the surface of the car.

8.) Gently remove the protective tape. Make sure the decal does not get stretched.

9.) Do not wash your car for a minimum of 24 hrs after pasting.

Vehicle Compatibility: All Models of Vitara Brezza | New Suzuki Brezza 2020